DBX iEQ15 Dual 15-Band Graphic EQ with Type V NR and AFS

With an EQ heritage that has produced countless industry standard patents and dates back more than 30 years, the dbx iEQ-31 easily lives up to the dbx legacy of uncompromised sonic integrity. In addition to unsurpassed equalization specs, the iEQ-15 also offers the built-in necessities which include AFS™ feedback Suppression, Type V™ noise reduction and PeakStopPlus® limiting. Besides including two 15-band channels of 2/3-octave equalization, the iEQ-15 also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut range, 40mm faders, XLR, 1/4'' and Euroblock inputs and outputs, nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability.

The iEQ series represents a major step forward in the performance of EQs. The iEQ series is now able to offer state-of-the-art digital EQ performance and specs with an analog look and feel. From its amazing 10Hz to 22kHz frequency response, to its 113dB dynamic range and Advanced Feedback Suppression (AFS™), dbx proprietary Type V™ noise reduction and PeakStopPlus® limiting, the iEQ-15 offers out of this world specifications with a downto- earth price point. Sure to find a home in the studio, on tour and with installed sound venues, the iEQ-15 is destined to take its rightful place in the lineage of great dbx® signal processors that are the professional’s choice in signal processing. With such pristine design and quality, the iEQ-15 offers the maximum sonic flexibility in a straight forward interface and rock-solid construction.

• Advanced Feedback Suppression (AFS™)


• Type V™ Noise Reduction


• PeakStopPlus® Limiting


• 2/3-octave Constant Q frequency bands


• Switchable boost/cut ranges of +6 or +15dB


• 18 dB per octave 40Hz low-cut filter


• +12dB input gain range


• XLR, TRS and Euroblock Inputs and Outputs


• Internal Toroidal Transformer


• Frequency Response of 10Hz to 22kHz


• Dynamic range of greater than 113dB


• User Power Up Features


• Relay Bypass for Power Failure System Protection

• INPUT


• Connectors: 1/4" TRS, female XLR (pin 2 hot), and Euroblock


• Type: Electronically balanced/unbalanced, RF filtered


• Impedance: Balanced 40k ohm, unbalanced 20k ohm


• Max Input Level: >+22dBu balanced or unbalanced


• CMRR: >40dB, typically >55dB at 1kHz


• OUTPUTS


• Connectors: 1/4" TRS, male XLR (pin 2 hot), and Euroblock


• Type: Active-balanaced/unbalanced, RF filtered


• Impedance: Balanced >120 ohm, unbalanced >60 ohm


• Max Output Level: >+20dBu balanced/unbalanced into 2k ohm or greater


• SYSTEM PERFORMANCE


• Frequency Response: 20Hz to 20kHz, +0.5/0.25dB


• Dynamic Range: >113dB, "A" weighted


• THD+Noise: <0.003%, typical at +4dBu, 1kHz


• Interchannel Crosstalk: <-80dB, 20Hz to 20kHz


• Noise Reduction: Up to 10dB of dynamic broadband noise reduction


• Digital Resolution: 24 Bits


• Sample Frequency: 48kHz


• Latency: 2msec


• POWER SUPPLY


• Operating Voltage: 120VAC 60Hz, 220240VAC 50/60Hz


• Power consumption: 17W


• Main Connection: IEC receptacle


• Dimensions: 3.5" H x 19" W x 7.9" D


• Note: Specifications subject to change without notice.